Maleic Anhydride/ Glycidyl Methacrylate Grafted Elastomer Resin

1. Product Introduction

Grafted elastomer resin is prepared by reactive extrusion method using elastomer resin (PO elastomer, Styrene-olefin elastomer, etc.) as the substrate and maleic anhydride or glycidyl methacrylate as the monomer. Theproduct has the characteristics of good reactivity and good processability, and is applied to modified engineeringplastic(PA, PC, PBT, etc.). As a compatibilizer, it endows materials with excellent compatibility and improves thecomprehensive performance of composite materials. As a toughening agent, it can greatly enhance the toughnessof the material.

2. Product Performance

*Test conditions: 230°C & 5kg.

Note: The above data are typical test values and should not be interpreted as specifications.

3. Instructions

1) Add quantity

This product is used as an additive, and the addition ratio is determined according to its purpose. The

recommended amount to be added is as follows:1L100 is used as a toughening agent for nylon, with a recommended addition amount of 2-15%;L150 is used as a compatibilizer/toughening agent for modified polyester, with a recommended addition

amount of 3-8%;

L200 is used as a compatibilizer for high filling and difficult to disperse systems, with a recommendedaddition amount of 3-15%;

4 L300 is used as a compatibilizer for TPE/TPR, with a recommended addition amount of 3-8%.

2) Processing temperature

Recommended processing temperature for L100/L150/L200/L300 is less than 280°C.

4. Packaging and Storage

The product has a granular appearance and is packaged in paper plastic composite bags, with each bag weighing25kg.

During transportation and storage, avoid moisture, high temperatures, direct sunlight, and pollution, and keepaway from sources of fire.

Use the product as soon as possible after opening the bag, within 12 months from the date of production. Ifabnormal color or odor is found after long-term storage, please stop using.

5. Security Matters

The product does not belong to dangerous goods. Please refer to our company's product safety data sheet.